website security

Upper Parts

Magpul

The MBUS (Magpul Back-Up Sight) is a low-cost, color injection molded, folding back-up sight.

In stock

Magpul

This folding adjustable sight set is designed to mount on your rifle top rail and..

In stock

Magpul

Unlike conventional vertical fore-grips, the Magpul AFG-2..


Magpul

Designed for use with MOE and ACR™ (Adaptive Combat Rifle) Hand Guards..

In stock

Out-of-stock
Magpul RVG Grip
  $21.95
Magpul

Designed for use with milspec 1913 Picatinny rail hand guards, the RVG is a basic


Magpul

The Magpul MOE™ Hand Guard for M16/AR15 rifles with carbine-length gas systems..

In stock

CORE15 Rifle Systems

The Billet Charging Handle Is Manufactured from a solid piece of 100% 6061-T6 Billet aluminum..

In stock
+

CORE15 Rifle Systems

This is the Retro-Fit Piston Driven System Developed by Adams Arms. Includes 1 Carbine Length Piece..

In stock
+

CORE15 Rifle Systems

.223/5.56  Mil-spec Carpenter158® steel bolt  MPI Stamped M16 8620 Steel Carrier  Nickel Boron Coating...

In stock
+

CORE15 Rifle Systems

The Billet Charging Handle Is Manufactured from a solid piece of 100% 6061-T6 Billet aluminum...

In stock
+

Magpul

The Magpul MOE Hand Guard for AR15/M16 rifles with mid-length gas systems combines the light weight...

In stock

CORE15 Rifle Systems

The Piccatinny Sling Attachment is the best way to take the weight out of your hands...

In stock
+

Out-of-stock

Low Pro Gas Block for your AR-15 .750 Gas Port


Gas Tube Roll Pin

In stock
+

Ergo Z Float Rail
  $149.99
ERGO

Carbine Length with no cap. 7 3/16" weighs 13oz.

In stock
+

Mid-Length AR15/M16 Gas Tube (Includes Roll Pin)

In stock
+

CORE15 Rifle Systems

Delta Assembly+C15 Barrel Nut

*CORE15 BARREL NUTS ARE NOT COMPATIBLE WITH TROY INDUSTRIES' RAILS*

In stock
+

Ejection Port Cover, Rod+Ring Retainer, & Spring

In stock
+

Forward Assist, Roll Pin & Spring

In stock
+

CORE15 Rifle Systems

CORE15™ Upper Receiver with the forward assist and ejection port assemblies installed for your convenience

In stock
+

Midwest Industries

Carbine weighing in at an incredible 11.3oz, this handguard adds virtually no weight to a standard carbine

In stock
+

AR Standard A2 Flash Hider, & Crush Washer

In stock
+

The Billet Charging Handle Is Manufactured from a solid piece of 100% 6061-T6 Billet aluminum, allowing it to be held to extremely consistent tolerances and maintain an exceptional level of strength. Hard Coat Anodized Finish.

If for any reason you are not 100% satisfied, return for a full refund. Lifetime, No questions asked, No BS Guarantee

In stock
+

CORE15® Bolt
  $59.99

CORE Rifle Systems AR15 Bolt Assembly, Complete

Carpenter 158® Steel, Shot Peened

Black Extractor Buffer

Viton O-Ringed Extractor

Batch MP Tested, Unmarked

In stock
+

SF3P-762-5/8-24
The advanced SureFire SF3P-762-5/8-24 three-prong flash hider, which fits the Armalite AR-10, DPMS LR308, and 7.62 mm rifles with 5/8-24 muzzle threads, features a patent-pending design...

In stock
+

SFMB-762-5/8-24

The advanced SureFire SFMB-762-5/8-24 muzzle brake, which fits the Armalite AR-10, DPMS LR308, and 7.62 mm rifles with 5/8-24 muzzle threads, greatly reduces both recoil impulse and muzzle rise and features neutral porting that loads bi-pod legs evenly. Its patented Impulse Diffusion design minimizes side blast and rear-directed concussion effects. The SFMB-762-5/8-24 also serves as a rock-solid mounting adapter for SureFire SOCOM...

In stock
+

ERGO

ERGO Z FLOAT RAIL SYSTEM, CARBINE LENGTH WITH OVERSHOOT AND A2 FRONT SIGHT CUT OUT

In stock
+

This NcSTAR MARDCH AR-15 Detachable Carry Handle will fit the AR-15 rifle. The NcSTAR AR-15 carry handle is fully adjustable for elevation and windage by adjustable controls. In addition, has a channel toimage mount additional accessories. For complete selection of NcSTAR Riflescope Mounts, Rings and Bases by NcSTAR on sale please visit NcSTAR's page. 

In stock
+

Firing Pin
  $6.99

CORE15™ standard firing pin used in all our BCG's

In stock
+

308 Crush Washer
  $2.99

Standard 308 Crush Washer

In stock
+

A shorter version of the BGV-MK46 Vertical Grip, THE NEW Stubby Grip (BGV-MK46K) is ideal for breaching shotguns, MK18's and M4 carbines. Perfect for Keeping CQB style weapons as compact as possible. Screw on cap allows for storage of small spare parts or batteries. Unlike the original Vertical Grip, the Stubby has no pressure switch pocket. Installation is the same as the BGV-MK46 Vertical Grip.

Length: 3 7/16"
Weight: 2.56 oz

In stock

BATTLEGRIP Model BGV-MK46 foregrip was designed for use on the M249 / MK-46 family of weapon systems. This heavy, belt-fed SAW is called upon to operate in hostile environments, often with CQB tactics that punish rail mounted foregrips.

  • Dual Locking Bar Mounting System
  • Integrated Pressure Switch Pocket
  • Waterproof Internal Storage Compartment

Length: 4 7/8"
Weight: 3.68 oz
Inside Diameter of Switch Pocket: 0.65"

In stock

CORE15 Rifle Systems

The Billet Charging Handle Is Manufactured from a solid piece of 100% 6061-T6 Billet aluminum...

In stock

Laser Engraved Ejection Port Cover

In stock

Standard (notched) AR15 Handguard Cap

.750 Diameter

In stock
+

*Installation requires machining to barrel* Includes "F" Marked A Frame Front Sight Base (Forged) Taper Pins (2)...

In stock
+

The MBUS® Pro is a corrosion resistant all-steel back-up sighting solution that delivers maximum functionality and strength with minimum bulk at a...

In stock
+

100% made in the U.S.S with Lifetime Warranty Complete install in minutes, romoval of delta ring is required Four anti-rotation QD sockets...

In stock
+

The Slide Fire 2-piece Hand Guard is designed with upper and lower heat shields for maximum cooling.  It accommodates gas piston or direct gas...

In stock

Panel Kit with 3 Panels

In stock

Designed to fit 1" tactical flashlights, this 1 3/16" offset mount keeps your light off-axis, making it possible to use a laser or other optic on...

In stock
+

Includes Ejection Port Ejection Port Spring Ejection Port Rod

In stock
+

4140 Steel Phosphate Finish Barrel OD at Gasport .750" 1.5 oz

In stock
+

4140 Steel Phosphate Finish Barrel OD at Gasport .750" 1.2 oz

In stock
+

The TORCH™ Backup Light (TBLWR)with white/red LED's is a low profile, Picatinny mounted, recessed pressure pad activated light ideal for Home...

In stock
+

The TORCH™ Backup Light (TBLW) with dual white LED's is a low profile, Picatinny mounted, recessed pressure pad activated light ideal for Home...

In stock
+

Out-of-stock

4140 Steel Phosphate Finish Barrel OD at Gasport .750" 1.2 oz


The Rail Light Mount fits on any standard 1913 Picatinny Rail, is available in right or left side models, and integrates with the Magpul XTM panels. It...

In stock
+

M4 Carbine Length Dual Heat Shield

In stock
+

The ZeroBravo Reversible Hand Stop (RHS) for KeyMod Rail Interface allows for use in multiple locations depending on your requirement.

In stock
+

Out-of-stock

The Midwest Industries Heavy Duty Flush Push Button QD Sling Swivel is identical to their original heavy duty push button QD swivel except that this one...


Allows for small micro red-dot optics, including the Trijicon RMR if equipped with the rail adapter, to be mounted at a 45 degree offset for close range...

In stock
+

Easily installed with the press of a stainless steel plunger, the cleats deliver a fully articulated aggressive foot to support the bipod. Available in...

In stock
+

Easily installed with the press of a stainless steel plunger they provide an additional 3 inches of elevation. Work with any of our three available feet....

In stock
+

Combining the best that NEBO® has to offer, the SLYDE™ features a powerful LED flashlight and COB work light all in one. At first...

In stock
+

12.5"  Keymod System Machined from 6005-T6 Aluminum Alloy Hard Anodized Comes with one (1) keymod section Comes with necessary...

In stock
+

5 Rail Sections/25/8” in Length CNC From 6061-T6 Aluminum  Black Anodized Coating Two (2) #632 Socket Head Fasteners Fits All...

In stock
+

Out-of-stock

12 Rail Sections/ 5” in Length CNC From 6061-T6 Aluminum  Black Anodized Coating Three (3) #632 Socket Head Fasteners Fits All...


CORE15 Rifle Systems

The Billet Charging Handle Is Manufactured from a solid piece of 100% 6061-T6 Billet aluminum..

In stock
+

CORE® 15" Keymod Rail (DPMS)
$229.99   $119.99

15"  Keymod System Machined from 6005-T6 Aluminum Alloy Hard Anodized Comes with one (1) keymod section Comes with...

In stock
+

9.5"  Keymod System Machined from 6005-T6 Aluminum Alloy Hard Anodized Comes with one (1) keymod section Comes with...

In stock
+

CORE15® 14.5" Barrel 5.56 NATO Mid-Length Gas System M4 Profile 1:7 Twist Light Weight 4150 CMV Chrome Lined...

In stock
+

CORE15® 10.5" 300 STD Profile, 1:7 Twist, Pistol Length Gas System, 4150, Black Nitride Weight: 1lb-5.5oz

In stock
+

STD Profile, 300 Blackout, 1:8 Twist, Carbine Gas System, 416R Bead Blasted Weight: 1lb-15.4oz

In stock
+