CMC Triggers Two Stage AR15/10 are available configured for Small Pin, Large Pin and M&P 15/22 Trigger in multiple pull weights and Signature Flat or Curved Bow. Please select the desired bow design, pull weight and pin size from the drop-down menu. Manufactured in the Great State of Texas
WHAT IS A TWO STAGE TRIGGER? - Two stage triggers require the shooter to pull the trigger until it hits a “break wall”, which is a stopping point between the first and second stages. Similar to taking up the slack as some people call it, the two stage trigger then breaks during the second stage after hitting the break wall. The benefit of a two stage trigger is that the shooter knows at exactly what point the trigger will break and is usually preferred on a DMR or marksman style bench-rest rifle.
CMC'S CURVED TRIGGER BOW - For the shooter who wants a traditional feel. The Curved Trigger has an exceptionally smooth feel and ultra-clean break. With excellent lock time and lighting fast positive reset, the CMC Curved Trigger is unsurpassed by any other fire control group. CMC’s AR-15/10 patented “Signature”
CMC'S FLAT TRIGGER BOW - Ultimate for feel and break. With the Shooters finger coming to rest naturally on the shoe, every pull is the same as the one before it. The CMC Flat Trigger Bow renders a linear feel unsurpassed by any other trigger bow shape.
WHAT PIN SIZE SHOULD YOU USE?
LARGE PIN (.172 Ø) - Colt is the only AR brand to produce both small and large diameter pins in their triggers. Colt AR-15 rifles produced between 1991 and late 2009 commonly take a LARGE PIN.
SMALL PIN (.154 Ø) – If your AR rifle is NOT a Colt or your Colt was produced before 1991 or after 2009 it will take a SMALL PIN.
M&P 15-22 COMPOSITE PIN – The Smith & Wesson® M&P® 15-22 or any wider than standard receiver will use a SMALL PIN diameter but requires a longer pin length and will take an M&P 15-22 COMPOSITE PIN.
CMC Triggers offer all versions of their Drop-in AR Trigger in SMALL PIN, LARGE PIN, and M&P 15-22 COMPOSITE PIN. If you are still unsure of the pin diameter needed for your rifle you can take a measurement by pressing a pin far enough out of the receiver to measure its diameter, .172 Ø for LARGE and 154 Ø for SMALL.